R Vision

post-header

A 28 mm PET bottle can take an aluminium roll-on pilfer-proof (ROPP) cap if its neck is drawn for one. The cap arrives as a plain aluminium shell, and the capping head rolls the thread and the tamper ring onto the PET neck, the same way it does on glass. R Vision Closures makes two caps for 28 mm PET: Aqua Cap for packaged drinking water and Bev Cap for soft drinks, juices and other beverages. Both are 28/15 mm, made for the PET and BPF neck finishes, with a TPE liner and a rating of 8 bar.

Aqua Cap 28/15 mm aluminium ROPP cap for PET and glass water bottles
Aqua Cap 28/15 mm aluminium ROPP cap for PET and glass water bottles

The PET finish a ROPP cap needs

Most PET water bottles in India are blown from preforms with a neck drawn for a moulded plastic screw cap, such as the 28 mm Alaska neck or the PCO finishes. Those necks take a plastic cap. A ROPP cap needs a PET neck drawn for a roll-on closure: a moulded thread the rollers can form the aluminium into, a bead below it for the tamper ring to tuck under, and a rim the liner can seal on.

Aqua Cap and Bev Cap are made for two PET finishes, listed on both product pages as PET and BPF. The preform drawing names the finish in its neck detail. If the drawing gives a plastic-closure code such as PCO 1881 or 29/25 instead, the neck is not drawn for a roll-on cap and a plastic cap is the right choice for it. The PET finishes on Indian water lines, and the standards behind them, are surveyed in neck formats on Indian packaged water bottles; all five finishes the caps are made for are described on the 28 mm ROPP neck finishes page.

Neck on the preform drawing Closure it takes
PET (roll-on) or BPF, 28 mm Aluminium ROPP cap, 28/15 mm: Aqua Cap or Bev Cap
28 mm Alaska Moulded plastic screw cap
PCO 1810 or PCO 1881 Moulded plastic screw cap
29/25, 30/25, 26/22 Moulded plastic screw cap

How roll-on capping forms the thread on a PET neck

The capping sequence is the same as on glass. The head places the shell over the neck and presses it down so the liner seats on the rim. A thread roller then runs round the shell and forms the aluminium into the thread moulded on the neck, and a pilfer roller tucks the foot of the skirt under the bead to make the tamper ring. The line, station by station, is set out in what ROPP capping involves.

What changes on PET is the neck itself. PET is softer than glass, so a PET neck gives under load where a glass one does not. Three settings matter more on PET as a result:

Setting What it does Why it matters on PET
Top load Presses the shell down so the liner seals on the rim Too much can distort the neck or the bottle shoulder
Thread roller pressure Forms the aluminium into the neck’s thread The roller has to form the shell without crushing the PET thread
Pilfer roller position Tucks the ring under the bead The bead on a PET neck has to be gripped without being cut

Each is set on the capping head against the bottle and the cap, and checked on sample bottles before a run. How a capping head is set up is covered in the ROPP capping machine guide, and what goes wrong when it is not in capping defects.

What changes against a plastic screw cap

Plastic screw cap on PET Aluminium ROPP cap on PET
Thread Moulded into the cap and the neck Moulded on the neck, formed into the cap at capping
Fit Any cap made to the finish code Formed to that one neck, so the fit is exact
Tamper evidence Moulded break-off band Aluminium cap with a PE ring: three-part break on Aqua Cap, retained ring on Bev Cap
On the shelf Moulded plastic, often plain Metal shell, plain, coloured, litho printed, or embossed or hot foiled on top
Capping head Torques a pre-threaded cap on Rolls the thread and ring onto the neck
Ordering By finish code By size, 28/15 mm, plus the finish and decoration

The general comparison, on glass and PET, is in ROPP cap vs screw cap, and aluminium against plastic on cost, weight and shelf look in aluminium vs plastic bottle caps.

Aqua Cap and Bev Cap on PET

Bev Cap aluminium ROPP beverage closure, 28/15 mm
Bev Cap aluminium ROPP beverage closure, 28/15 mm
Aqua Cap Bev Cap
On PET for Packaged drinking water, still and sparkling Soft drinks, juices and other beverages
Size 28/15 mm 28/15 mm
PET finishes PET, BPF PET, BPF
Ring Three-part break-system PE ring Retained PE ring: Round Ring, Two Slit or Five Slit
Liner TPE TPE, PVC-free
Pressure Up to 8 bar Up to 8 bar
Fills Hot fill, cold fill, carbonated Hot fill, cold fill, carbonated
Top decoration Plain, litho printed, embossed Plain, litho printed, hot foiled
Side decoration Plain, litho printed Plain, litho printed

Both run on standard roll-on application machinery and adhere to USFDA and EU standards. Minimum orders are 50,000 caps in plain silver, 200,000 in plain colours and 300,000 litho printed, with a lead time of 4 to 6 weeks. The caps are packed in PE bags inside export-worthy corrugated cartons, stored at 5 to 30 °C and keep for two years from the manufacturing date on the carton.

Water and carbonated drinks on PET

Still water. Aqua Cap’s three-part ring parts visibly on first opening, which is the proof a water buyer looks for on a pack bought sealed. On a PET bottle it also sets the pack apart from the plain plastic caps around it on the shelf. The water application is covered in closures for packaged drinking water.

Sparkling water and soft drinks. A carbonated drink pushes outward on the bottle and the closure, and the pressure rises in warm storage. Both caps withstand up to 8 bar, explained in what an 8 bar pressure rating means. The PET neck has to be drawn for the pressure too, and the preform maker states this for its finish. Bev Cap’s retained ring lets the bottle reseal between servings. See closures for carbonated soft drinks.

Hot-filled juices. Both caps are made for hot fill. On PET the bottle and neck also have to hold their shape at fill temperature, which hot-fill PET bottles are made for; confirm it with the preform maker. Juices are covered in closures for juices and RTD beverages.

Tamper-evident caps on PET under Indian rules

No Indian rule names one tamper-evident method for PET bottles. Packaged drinking water is made to IS 14543, every food business needs an FSSAI licence, and the Food Safety and Standards (Packaging) Regulations, 2018 require materials in contact with the product to be food-grade. On PET, as on glass, a cap that visibly breaks on first opening is how bottlers show the pack is securely sealed. The rules are collected in FSSAI packaging rules for bottled beverages.

Frequently asked questions

Can an aluminium ROPP cap be used on a PET bottle?

Yes, if the PET neck is drawn for a roll-on closure. The capping head rolls the thread and tamper ring onto the PET neck the same way it does on glass. Aqua Cap and Bev Cap are made for the PET and BPF finishes.

What cap size fits a 28 mm PET bottle?

A 28 mm PET neck drawn for a roll-on cap takes a 28 mm ROPP cap, such as 28/15 mm: a 28 mm shell with a 15 mm skirt. Necks drawn for plastic caps, such as Alaska or PCO 1881, take a moulded plastic screw cap instead.

Will an aluminium cap fit a PCO 1881 neck?

Not as a rule. PCO 1881 is a PET finish drawn for moulded plastic screw caps. An aluminium ROPP cap needs a PET neck drawn for a roll-on closure. Check the finish named on the preform drawing.

Are aluminium caps on PET bottles suitable for carbonated drinks?

Aqua Cap and Bev Cap withstand up to 8 bar and are made for carbonated beverages. The PET bottle and neck also have to be drawn for the pressure, which the preform maker states for its finish.

Does capping PET with a ROPP cap need a different machine?

It needs a roll-on capping head rather than a screw-cap torque head. Aqua Cap and Bev Cap run on standard roll-on application machinery. On PET the top load and roller settings are set so the softer neck is not distorted, and checked on sample bottles before a run.

What is the minimum order for 28 mm aluminium caps for PET?

50,000 caps in plain silver, 200,000 in plain colours and 300,000 litho printed, for Aqua Cap or Bev Cap, with a lead time of 4 to 6 weeks.

Sources

R Vision Closures makes Aqua Cap and Bev Cap at MIDC Malegaon, Sinnar, Nashik. For glass bottles, see the 28 mm glass bottle caps page. To confirm your PET finish, send the preform drawing or a sample bottle through contact us.

This will close in 0 seconds