A 28 mm glass bottle for water, soft drinks or juice is usually closed with an aluminium roll-on pilfer-proof (ROPP) cap, formed onto the glass neck at capping. In Europe the 28 mm roll-on glass finishes are the MCA range; in India, glass bottles for free flowing liquids carry a 28 mm or 31.5 mm ROPP finish under IS 11984. R Vision Closures makes two caps for 28 mm glass: Aqua Cap for water and Bev Cap for soft drinks, juices and other beverages, both 28/15 mm, made for the MCA I/II/III, MCA 7.5 R and MCA 7.5 RF finishes, with a TPE liner and a rating of 8 bar.

The glass finishes a 28 mm ROPP cap fits
The glass neck carries the thread and the bead; the cap arrives as a plain shell and is formed to them. So the finish moulded on the bottle has to be one the cap is made for.
| Finish | Drawn for | Aqua Cap and Bev Cap |
|---|---|---|
| MCA I/II/III | 28 mm screw finishes for glass beverage bottles; MCA III for glass with internal pressure | Made for it |
| MCA 7.5 R | 28 mm finish for pressure capsules on returnable and one-way glass | Made for it |
| MCA 7.5 RF | 28 mm finish for glass holding pressurised or vacuum liquids | Made for it |
The MCA dimensions are now published together in EN 17829:2023, and CETIE publishes a data sheet for each. The data sheet numbers, and the other glass finishes a ROPP cap meets, are in glass bottle neck finishes for ROPP caps. The Indian roll-on finishes in IS 7511 (Part 4), which IS 11984 calls up, are in neck finish standards on Indian glass bottles. Each of the five finishes the caps are made for, glass and PET, is explained on the 28 mm ROPP neck finishes page.
The standard ROPP finish on a 500 ml glass water bottle
A 500 ml glass water bottle normally carries a 28 mm roll-on finish. In India, IS 11984 gives glass bottles for free flowing liquids a 28 mm or 31.5 mm ROPP standard finish; water bottles use 28 mm. Glass made to the European range carries one of the MCA finishes. The bottle drawing names which. A 28 mm finish measures 26.77 to 27.41 mm across the thread under IS 7511 (Part 4), and how to measure a bottle cap size gives the full readings.
How the cap seals on a glass neck
The capping head places the shell over the neck and presses it down so the liner seats on the rim. A thread roller forms the aluminium into the glass thread, and a pilfer roller tucks the foot of the skirt under the bead to form the tamper ring. The seal is made by the TPE liner pressed against the rim; the formed thread holds it there. Because the shell is formed to the bottle in front of it, small differences between bottles in the same finish are taken up at capping.
| Part of the neck | What the cap does there |
|---|---|
| Rim, the sealing surface | The TPE liner is pressed against it and seals |
| Thread | The thread roller forms the aluminium into it |
| Bead below the thread | The pilfer roller tucks the tamper ring under it |
Glass gives a firm neck that does not give under the rollers. The surface treatment on the glass matters too: the coatings applied at the hot and cold ends of the glassworks affect how a liner seals, explained in cold-end and hot-end treated glass. The line itself is set out in what ROPP capping involves.
Returnable and one-way glass
| Returnable glass | One-way (single-trip) glass | |
|---|---|---|
| Life of the bottle | Collected, washed and refilled many times | Filled once and recycled |
| Finish | Drawn to keep its sealing surface through repeated trips; MCA 7.5 R was written for returnable as well as one-way glass | Any of the MCA finishes |
| Typical use | Bottles on a deposit or return loop, such as water and soft drinks supplied to hotels and restaurants | Retail water, juices and soft drinks |
| What to watch | Chips and wear on the rim after many trips; washing can strip surface treatment | Matching the cap to the finish on the drawing |
On a returnable loop, each trip ends with a new cap. A ring that breaks visibly matters more here than anywhere, because a refilled bottle looks exactly like a fresh one.
Aqua Cap and Bev Cap on glass

| Aqua Cap | Bev Cap | |
|---|---|---|
| On glass for | Still and sparkling water, for hotels, restaurants and premium retail | Soft drinks, juices, kombucha and other beverages |
| Size | 28/15 mm | 28/15 mm |
| Glass finishes | MCA I/II/III, MCA 7.5 R, MCA 7.5 RF | MCA I/II/III, MCA 7.5 R, MCA 7.5 RF |
| Ring | Three-part break-system PE ring | Retained PE ring: Round Ring, Two Slit or Five Slit |
| Liner | TPE | TPE, PVC-free |
| Pressure | Up to 8 bar | Up to 8 bar |
| Fills | Hot fill, cold fill, carbonated | Hot fill, cold fill, carbonated |
| Top decoration | Plain, litho printed, embossed | Plain, litho printed, hot foiled |
| Side decoration | Plain, litho printed | Plain, litho printed |
Both run on standard roll-on application machinery and adhere to USFDA and EU standards. Minimum orders are 50,000 caps in plain silver, 200,000 in plain colours and 300,000 litho printed, with a lead time of 4 to 6 weeks.
Water, soft drinks and juices in glass
Water. On a glass water bottle at a hotel table or on a premium shelf, the cap is part of the look of the pack. Aqua Cap carries a litho printed or embossed top and a three-part ring that shows first opening. The water application is covered in closures for packaged drinking water, and premium labels in premium water bottle caps.
Soft drinks and sparkling water. Glass holds carbonation well, and both caps withstand up to 8 bar, explained in what an 8 bar pressure rating means. Bev Cap’s retained ring lets the bottle reseal. See closures for carbonated soft drinks.
Juices. Juice in glass is often hot filled, and both caps are made for hot fill. Bev Cap’s PVC-free liner is the only part touching the drink. See closures for juices and RTD beverages.
Frequently asked questions
What cap fits a 28 mm glass bottle?
A 28 mm glass bottle with a roll-on finish takes a 28 mm aluminium ROPP cap, such as 28/15 mm. Aqua Cap and Bev Cap are made for the MCA I/II/III, MCA 7.5 R and MCA 7.5 RF glass finishes. Check the finish on the bottle drawing.
What is the standard ROPP finish for a 500 ml glass water bottle?
A 28 mm roll-on finish. In India, IS 11984 gives glass bottles for free flowing liquids a 28 mm or 31.5 mm ROPP standard finish, and water bottles use 28 mm; European glass uses the 28 mm MCA finishes. The bottle drawing names the exact finish.
Can ROPP caps be used on returnable glass bottles?
Yes. The bottle is recapped with a new cap on each trip. MCA 7.5 R is a 28 mm finish written for pressure capsules on returnable as well as one-way glass, and Aqua Cap and Bev Cap are made for it.
How does an aluminium cap seal on a glass bottle?
The TPE liner inside the cap is pressed against the rim of the glass neck, and the thread roller forms the aluminium into the glass thread to hold it there. A pilfer roller tucks the tamper ring under the bead below the thread.
Are aluminium caps on glass suitable for carbonated drinks?
Yes. Aqua Cap and Bev Cap withstand up to 8 bar and are made for carbonated beverages, and the MCA III, MCA 7.5 R and MCA 7.5 RF finishes are drawn for glass with internal pressure.
What is the minimum order for 28 mm aluminium caps for glass bottles?
50,000 caps in plain silver, 200,000 in plain colours and 300,000 litho printed, for Aqua Cap or Bev Cap, with a lead time of 4 to 6 weeks.
Sources
- BSI, BS EN 17829:2023, Glass packaging, 28 millimetre screw finishes (MCA range), dimensions.
- CETIE, Finish data sheets (GME), for the MCA glass finish sheets.
- Bureau of Indian Standards, IS 11984: 1986, Glass Bottles for Free Flowing Liquids, for the 28 mm and 31.5 mm ROPP finish.
- Bureau of Indian Standards, IS 7511 (Part 4): 1986, Roll-on Threads Pilferproof, for the 28 mm thread diameter band.
R Vision Closures makes Aqua Cap and Bev Cap at MIDC Malegaon, Sinnar, Nashik. For PET bottles, see the 28 mm PET bottle caps page. To confirm your glass finish, send the bottle drawing or a sample through contact us.