R Vision

post-header

Natural mineral water is a different product from packaged drinking water in India. It comes from a protected underground source, keeps its own mineral composition, and is made to IS 13428 rather than IS 14543. Its closure has the same three jobs as any water cap, a food-contact liner, a clean seal and visible tamper evidence, with two additions: it must not change a composition the label declares, and it may have to hold carbonation. R Vision Closures makes Aqua Cap for this, a 28/15 mm aluminium ROPP closure with a TPE liner, a three-part break-system ring and an 8 bar rating.

Still water in a glass bottle sealed with an Aqua Cap aluminium closure
Still water in a glass bottle sealed with an Aqua Cap aluminium closure

How natural mineral water differs from packaged drinking water

Both products are sold sealed, both need an FSSAI licence, and both used to need BIS certification. The difference is where the water comes from and what may be done to it.

Point Packaged drinking water Packaged natural mineral water
Indian Standard IS 14543 IS 13428
Source Any source, treated to meet the limits An underground source, protected from pollution
Treatment A permitted list including filtration, reverse osmosis, demineralisation, remineralisation and disinfection Limited to treatments the standard permits, such as separating unstable constituents like iron, manganese, sulphur or arsenic compounds
Composition May be adjusted by treatment Characterised by its mineral salts and trace elements, which stay stable
Carbonation Usually still Still, naturally carbonated, or carbonated, each declared on the label
FSSAI licence Mandatory Mandatory
BIS certification Voluntary since 17 October 2024 Voluntary since 17 October 2024

The comparison is set out clause by clause in IS 14543 explained, which covers both standards and the FSSAI orders that changed the certification position. On 17 October 2024 FSSAI notified the omission of the clauses that made BIS certification compulsory for packaged drinking water and packaged mineral water, and its Scheme of Testing, in force from 1 January 2026, applies monthly testing to both. The route for a brand that wants the ISI mark anyway is in BIS certification for a water brand.

What natural mineral water asks of the closure

The cap is not certified on its own under either standard. The bottler answers for the sealed pack, and the container standard reaches the cap directly: IS 15410, for plastic containers of packaged drinking water and natural mineral water, requires suitable closures of metal or plastics that are pilfer-proof in character. Beyond that, a mineral water brand needs four things from its closure.

What the closure must do Why it matters for mineral water How Aqua Cap meets it
Show first opening clearly The water is bought on trust in an untouched source, and the sealed pack is the only proof Three-part break-system ring that separates visibly and cannot be pushed back
Leave the water’s taste and composition alone The label declares a mineral composition, and the liner is the only cap part touching the water TPE liner; adhering to USFDA and EU standards
Seal for a long shelf life Mineral water is bottled at its source, often far from where it is sold Liner compressed onto the rim by the capping head, thread formed on the neck
Hold carbonation where the water is sparkling Naturally carbonated and carbonated mineral waters press on the cap, more so as the bottle warms; the sparkling water bottle caps page sets out the pressures Rated to 8 bar

The food-contact rules behind the second line, and the documents to ask a closure supplier for, are in food-grade aluminium and liner standards. The packaging rules that sit alongside them are in FSSAI packaging rules for bottled beverages.

Glass and PET necks

Natural mineral water in India is sold in PET for retail and in glass for hotels, restaurants and gifting. The neck decides whether an aluminium cap can go on at all.

Pack Neck Cap that fits Aqua Cap?
Glass bottle, hotels, restaurants and premium retail 28 mm MCA roll-on finish Aluminium ROPP, 28/15 mm Yes
PET bottle drawn for a roll-on cap PET or BPF finish Aluminium ROPP, 28/15 mm Yes
Standard PET bottle with a moulded thread 28 mm plastic-closure finish such as PCO 1881, or the three-start 29/25 and 30/25 Moulded plastic screw cap No
Sparkling mineral water in standard PET PCO 1810 or PCO 1881 Moulded pressure-rated plastic closure No

Aqua Cap is made for the MCA I/II/III, MCA 7.5 R, MCA 7.5 RF, PET and BPF finishes, as its product page lists them. The glass finishes are mapped in glass bottle neck finishes for ROPP caps, and the PET finishes in use on Indian water lines in neck formats on Indian packaged water bottles. Send the bottle or preform drawing to the closure maker rather than a nominal diameter, because two 28 mm necks can be cut to different drawings.

Aqua Cap’s specification

Aqua Cap is R Vision’s closure for packaged drinking water, and the same closure covers natural mineral water still or carbonated.

Specification Aqua Cap
Closure type Aluminium roll-on pilfer-proof (ROPP) closure
Size 28/15 mm
Shell and ring Aluminium shell, PE ring
Liner TPE (thermoplastic elastomer)
Tamper system Three-part break-system ring
Pressure rating Up to 8 bar
Fills Hot fill, cold fill, carbonated
Finishes MCA I/II/III, MCA 7.5 R, MCA 7.5 RF, PET, BPF
Top decoration Plain, litho printed, embossed
Side decoration Plain, litho printed
Colours Customised to the brand
Standards Adhering to USFDA and EU standards
Machinery Standard roll-on application machinery
Packing PE bags inside export-grade corrugated cartons
Storage and shelf life 5 to 30 °C; two years from the manufacturing date

Aqua Cap is designed for niche and premium water labels. The source, the region or the spring name can go on the cap top in litho print or embossing, and the colour is matched to the brand. Why premium water labels choose aluminium on glass is set out in premium water bottle caps.

Aqua Cap aluminium ROPP closure for bottled water
Aqua Cap aluminium ROPP closure for bottled water

Order terms

Order type Minimum order
Plain silver 50,000
Plain colours 200,000
Litho printed 300,000

Lead time is 4 to 6 weeks. A mineral water brand bottling at a remote source usually plans closures against the season, so order ahead of the summer peak. How a volume order runs from enquiry to despatch is in bulk ROPP cap orders, and the decisions a new water brand makes on its closure are in choosing caps for a water brand.

Frequently asked questions

What is the difference between mineral water and packaged drinking water in India?

Natural mineral water comes from a protected underground source, keeps its own mineral composition and is made to IS 13428. Packaged drinking water can come from any source, is treated to meet the limits, and is made to IS 14543. Both need an FSSAI licence, and BIS certification for both has been voluntary since 17 October 2024.

Does a mineral water bottle cap need BIS certification?

No. Neither IS 13428 nor IS 14543 certifies the cap as a separate article. The bottler answers for the sealed pack, and the container standard IS 15410 asks for closures of metal or plastics that are pilfer-proof in character.

Which cap suits natural mineral water in glass bottles?

An aluminium ROPP cap made for the bottle’s roll-on finish. Glass mineral water bottles for hotels and restaurants commonly carry a 28 mm MCA finish, which Aqua Cap is made for at 28/15 mm.

Can the same cap be used for still and sparkling mineral water?

Yes, if it is pressure-rated. Aqua Cap is rated to 8 bar, so a brand can run still, naturally carbonated and carbonated mineral water on one closure and one capping setup.

Does the cap liner affect the taste of mineral water?

The liner is the only part of the cap touching the water, so its material matters. Aqua Cap uses a TPE liner and adheres to USFDA and EU standards for food contact. Ask any closure supplier for the liner material declaration for your quality file.

What is the minimum order for mineral water caps?

For Aqua Cap the minimum is 50,000 caps in plain silver, 200,000 in plain colours and 300,000 litho printed, with a lead time of 4 to 6 weeks.

Sources

For the full specification, see the Aqua Cap product page, the closure in detail on Aqua Cap by R Vision, or contact R Vision on +91 72620 02754.

This will close in 0 seconds